Where can I find cheap arrows for archery that are wooden?
I have a Longbow, but no arrows. I need to find some cheap arrows. They must be made of wood and have feather fletching. Please help.
It would be helpful if you said what country you lived..
This site has a pretty good deal, 12 for $98, normally arrows are at least $10 each…
Kyudo (Japanese Archery) Arrow
archery arrows feathers
Everything You Always Wanted to Know About Lighted Arrow Nocks
No bow hunting session can ever be completed without good quality lighted nocks. These can literally make or break any practice or hunting expedition. Here in this article we talk about the various aspects of these lighted nocks.
What are lighted nocks?
The nocks basically refer to the grooved ends of the bow where the string is attached. It is a rather small plastic portion of the arrow which is situated on the edge of the bow. It usually looks like a groove in the shape of a ‘V’. It also refers to the place where the feathered portion of an arrow is fit. The nocking point refers to the location over the bow’s string on which the nock of the arrow is placed. Lighted nocks refer to nocks which have an intensive LED device or other source of light attached to them. This helps provide luminosity and facilitates easy detection of arrows and game.
How to make your very own nock?
You can consider making your own nocks or even lighted nocks if you so wish. All that is needed is cutting a groove on one side of your arrow. However, one aspect to give thought to, is that the deeper is the nock the more weak your arrow will become. Hence, for all practical purposes, a shallow nock is best for achieving good success.
Things to consider
Another aspect about the nock that you should consider seriously is the tightness at which it is resting over the string. The purpose of a nock is to hold the arrow steady. The small slit on the tip helps accomplish this functionality. Hence, ideally the nock should not sit over the string too tight. If this happens, then your lighted nocks can cause stray release of the arrows. This will result in a rough release, which will not ensure good precision of the hunting session.
You should also check to make sure that the nock is not damaged. If the lighted nocks are damaged then the arrows could leave the bow suddenly resulting in an inaccurate hit. If you are in a serious hunting expedition then this could result in a miss or even losing your game altogether. Make sure to always inspect all of your arrows before you shoot them. Ideally, the lighted nocks need to have smooth and polished surfaces. Any cracks or rough edges can cause inaccuracies in hunting. If such faults exist on the lighted nocks then it can cause tampering with the string’s quality.
Why lighted nocks can help?
As opposed to the regular nocks it is best to opt for the lighted nocks. These provide a source of intense, bright light which can at times stay lit for even 48 hours at a stretch. Using these lighted nocks you can estimate the speed and shot placement of your arrows during target shooting practice sessions. You can also use these to locate your downed game easily. Some of the new-age lighted nocks even stay lit after the arrow has been removed from the shaft. This way, you can easily locate where your game has fallen. You can also locate lost arrows using these lighted nocks.
About the Author
Eagle Archery offers a great selection of
lighted nocks
. Visit us on the web for our full collection of
Lighted Nocks
and
Archery Equipment
.
how to make a wood arrow for a bow?
i want to know how to make a archery arrow, i can get all the equipments i just need to know how to make it. i hate paying 20 bucks Just for a arrow, so im going to make my own.if you can answer this tell me how people space out the feather so evenly b/c at you tube i see people just guessing where the fetching goes.
please include a website or instruction. any help is appreciated
First the shaft, it’s not just about straightness or weight, the shaft need to be spined properly. You see when you shoot an arrow out of a bow, the arrow bends, bend too much or too little and the arrow won’t go the way you point it. If you need to make a mistake though, error on the stiff side. This part is rather hard if you don’t have a spine tester. A spine tester is easy enough to make, what you need is a 2 pound weight, something to hang the weight on the shaft, and two blocks of wood. Here’s what you do, place the blocks 26″ apart, place the would be arrow shaft across the blocks. Hang the weight approximately in the middle of the shaft, and measure the deflection of the shaft to the hundredth of an inch if possible. For shaft material I’ve used hard wood dowels just for kicks. They don’t last long but they work ok for light bows.
I don’t know how heavy your bow is, but you can use Easton spine chart or any other manufacturer to guess what spine you should need. You’ll need to know your draw length and the bow’s draw weight at that draw length to determine the spine needed. A half inch deflection for example is good for use on a 40 pound bow with a 30″ draw length. So now you have your shaft, next you need to taper both ends, to swage it as we call it. You can use a pencil sharpener or sander to taper the ends. You put the nock on one end and points on the other. The nock and point you’ll be better off buying already made. They should cost about $1 per arrow.
Fletching is the last step. If you’re using feathers, your best bet is to use a fletching jig, AAE makes a cheap one for about $20. I do know some people that can fletch just by sight. You’ll need a fast drying glue, because the problem with feathers is that it has a natural curl. So if you have no jig, you’ll have to hold on to that feather until the glue sets, normal fletching glue(fleth tite) takes about 20 minutes to dry. Spacing and straightness will come with training if you’re not using a jig. With a jig it’s all automatic. Once you’re done gluing all the feathers, make sure to add a dab of glue to the leading and trailing ends of each feather. This final step will make a huge difference on how long your feathers will stay on the shaft. Good luck.
Homemade Non-fletched Arrows
archery arrows feathers
Bow Hunting Supplies – Every Archery Needs Vanes
Vanes are used to stabilize the flight of the arrow. They usually have a consistent flight pattern in all weather conditions. They come in feather or plastic varieties. And depending on your specific needs, you can figure out which ones would suit you best. Let’s go ahead and take a look at some more quality bowhunting supplies.
Quik Spin ST Vanes
The first New archery products we will look at is the Quik Spin ST Vanes. These vanes are constructed to be very tough and reliable, so you won’t spend so much time re-fletching arrows. And that is a great benefit when you want to shoot a lot more and fix problems less. This is a great example of quality bowhunting supplies. With the new and improved Quik Spin system, and a lower profile, you can shoot more accurately even at distance. And because it has micro grooves on one side of it, the vane is able to channel air to provide a flatter trajectory in flight. And the patented kicker system can actually increase the spin of an arrow by up to 300%. You will benefit from this because it will produce tighter groupings. The combination of the micro grooves and patented kicker system can stabilize arrows in half the time as conventional vanes can. This is another high tech example of bowhunting supplies.
Quik Spin Vanes
The next offering from New Archery Products is the Quik Spin Vanes. If you want to shrink your groups, then you will enjoy the Quik Spin Vanes. This vane takes spin and accuracy to a whole new level, and you benefit from tight groups all the time. The vanes rotate over 100% quicker than feather vanes, and up to 300% faster than plastic vanes. Now let’s look at some more quality bowhunting supplies from Bohning Archery.
Mini Blazer Vanes
The first high quality bowhunting supplies offered by Bohning Archery are called the Mini Blazer Vanes. These vanes were designed to be used with mechanical broadheads or field points. They are a perfect option for target shooters if you want the quality of a Mini Blazer’s steering capability without a lot of extra weight. A top-notch item when it comes to bowhunting supplies.
Bohning Archery X Vanes
Next is the Bohning Archery X Vanes. These vanes are built by a company with over 60 years of experience with vanes. So they realize that they needed to build highly durable and highly accurate vanes. And they have succeeded with this product. It definitely lives up to all of the expectations.
Micro Blazer Vane
Last, we will look at another high quality bowhunting supplies item from Bohning Archery. It is the Micro Blazer Vane. This little vane is a smaller version of the Blazer Broadhead Vane. It benefits target shooters because it is a small vane and it uses the great steering technology of the original Blazer Vane. It only weighs just over 2 grains. A great bowhunting supplies example of quality products.
Vanes play such an important role in how your arrows fly, how fast they go and how accurate they will be. This article has discussed vanes made by Bohning Archery and New Archery Products. This is just scratching the surface of available vanes, though. If you want to find out more about them, visit www.eaglearchery.com.
About the Author
At Eagle Archery we are dedicated to providing you with the largest selection of
Bowhunting Supplies
on the Internet. We have a great
Crossbows
in addition to a great
compound bow
collection.
i shoot archery and i use the actual feathers on my arrows?
i shoot archery and i use the actuall feathers on my arrows the parts of the feathers are starting to break off and ruin the feather any way to prevent this from happening in the future thx
First make sure they’re put on the arrows properly, make sure the shafts were clean when you put it on, make sure they’re spaced evenly, put a dab of glue to the front and rear ends of each feather.
Then, when shooting, as the other poster said, be sure to have the index feather facing away from the bow. Index feather is just a fancy name for the one feather that sticks straight out of the bow, meaning directly perpendicular if you’re looking from the nock end of the arrow while it’s on the string. If there’s is no one feather that is sticking out, then your nock is put on improperly.
Once you’re done with all that and you’re still shredding feathers, then it’s time for tuning. First get yourself one of those foot spray, you know the ones that cures athlete’s foot. Make sure you get the regular foot spray not the clear kind. Spray some of that stuff on your bow, around where the arrow might make contact, around the shelf area. Shoot, and every shot watch the sprayed area for contact marks.
When arrows are making contact, usually the problem is either the arrow is too weak or too long. An arrow can be perfectly spined but if too long you can also have clearance issue. Too long meaning the arrow is sticking out well over 3″ at full draw. If your arrows are sticking way out like that, you need to get weaker shafts so they can be cut to the proper length.
Homemade Non-fletched Arrows
